Design Advantage

As the market leader, Clean Burn has more certified engineers on staff constantly improving and creating new waste oil furnaces, boilers, recycling centers and storage tanks than any other manufacturer. A lot of technical expertise is required for the world’s largest selection of waste oil furnaces and boilers.

Another reason Clean Burn is the industry leader is our focus. It’s all we do. We don’t make dryers, parts washers, lifts or any other type of shop equipment.

As you make the important decision on which waste oil furnace to buy, keep that in mind. To Clean Burn, a waste oil furnace is too important to be an afterthought.

The Clean Burn Heat Exchanger

Clean Burn Heat ExchangerIt is simple physics. The more surface area exposed to a combustion chamber, the more heat you will capture. The more time room air circulates around a heated surface, the warmer it becomes.

There's nothing else in the world like the remarkable Clean Burn Heat Exchanger. Compared to inexpensive Blast Tube furnaces, which feature a simple cylinder shaped combustion chamber, a Clean Burn Heat Exchanger provides approximately 200% more surface area for capturing combustion heat. You get more heat from less oil.

The result is a lower stack temperature, more economical use of your waste oil, easier maintenance and longer service life.

The Clean Burn Pump

The oil pump is a key component in any waste oil furnace. As every mechanic knows, it is better to have a heavy duty component that doesn't have to work to the limit of its ability over time. That is why the Clean Burn Pump is made so "beefy," so heavy duty.

Compared with competitive units with plastic gears and overworked electric motors requiring fan cooling, the Clean Burn Pump features heavy duty steel gears encased in an oil bath, and precision assembly to help ensure a very long, very reliable service life. Oil flow is consistently held because precise gear ratios and pump speeds are set for each individual furnace. This maintains correct flow rates no matter what type of oil and viscosity is used and provides for optimum performance.

In short, if you were building your own waste oil furnace, you would choose a Clean Burn Pump, no question.

Advanced Burner Design

Advanced Burner DesignUnlike standard fuel oil, waste oil must be pre-heated in order to ignite properly, and they have a higher flash point. Some waste oil furnaces are modified fuel oil burners, but that approach simply isn't good enough for Clean Burn customers.

The Clean Burn burner is engineered from the ground up exclusively to burn waste oils, and burns standard fuel oil for added versatility. The pre-heater block heats oil and air to the same precise temperature for efficient combustion.

The mixture is ignited at the burner retention head, where additional combustion air is added, which swirls in a carefully calculated pattern to maximize combustion efficiency and help make flame control easier.

The special retention head creates more air turbulence at the point of ignition to generate a larger, more efficient flame, making operation more reliable and more forgiving for burning waste oils.

Waste oil furnaces that use modified Beckett fuel oil burners (which are outstanding when used with standard fuel oil) are much more susceptible to nuisance flame-outs, or shut-downs. Clean Burn furnaces are legendary for reliability. The burner system is one good reason why.

The unique modular design of the Clean Burn burner also makes service faster and easier.

Swedged, Not Welded

SwedgeA swedge is a way of joining metal parts without welding. Welded joints are susceptible to cracking and failing in a combustion chamber environment. The tubes in our Heat Exchanger system are not welded together, but swedged, allowing the metal parts to expand and contract with minimum metal fatigue. This means added years of reliability and service life for your Clean Burn furnace.